HDPE Pipe
Application
- Drinking Water Supply.
- Lifting of water for agriculture Irrigation or farm house purpose.
- Obtain Water through pumps, bore wells using jets and submersible pumps show better Performance in tube well boring.
- Industrial disposal of chemical effluent & waste.
- Sewerage and drainage systems.
- Transportation of aggressive fluids chemicals and acid.
- Water supply mains and distribution lines.
- Domestic plumbing & floor heating pipe lines.
- Centrally heated hot water pipeline in building, hotels, swimming pools.
- Telecommunication cable ducting.
- Air Conditioning ducting.
- Portable Water supply in urban area as well as rural area.
- Gases like natural gas, liquefied gas and fermentation Gas and oil distribution Supplying lines.
- Cooling water pipe lines like thermal power equipment.
- Used for transportation slurries of iron, Fly Ash etc.
Special Features & Identity
- Light in weight and high tensile strength.
- Resistance to Corrosion, abrasion & UV radiation.
- Smooth internal surface finish which have low friction which save energy.
- Have no effect of weather conditions.
- Strong and long lasting., Up to 50 years durability
- Installed in bore wells without joints.
- Hard and unbreakable
- Low thermal and electrical conductivity.
- Non-toxic
- Perfect weld ability
- Safe for lying under water, under soil, under coastal salt marshes.
- Can be butt welded at site in minutes making joints very strong.
- Safe for portable water as raw material comes with a food grade certificate.
Dimension & Wall Thickness of HDPE Pipe
Pipe Wall Thickness in mm
| SDR | SDR 41 | SDR 33 | SDR 26 | SDR 21 | SDR 17 | SDR 13.6 | SDR 11 | SDR 9 | SDR 7.4 | SDR 6 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Grade | Nominal Pressure (PN) Bar | ||||||||||||||||||||
| PE 63 | PN 2 | PN 2.5 | PN 3.2 | PN 4 | PN 5 | PN 6 | PN 8 | – | – | – | |||||||||||
| PE 80 | PN 2.5 | PN 3.2 | PN 4 | PN 5 | PN 6 | PN 8 | PN 10 | PN 12.5 | PN 16 | PN 20 | |||||||||||
| PE 100 | PN 3 | PN 4 | PN 5 | PN 6 | PN 8 | PN 10 | PN 12.5 | PN 16 | – | – | |||||||||||
| OD | Wall Thickness (mm) | ||||||||||||||||||||
| Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | ||||||||||||
| mm | inch | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max |
| 16 | 1/4″ | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1.80 | 2.10 | 2.20 | 2.50 | 2.70 | 3.10 |
| 20 | 1/2″ | – | – | – | – | – | – | – | – | – | – | – | – | 1.90 | 2.20 | 2.20 | 2.60 | 2.70 | 3.10 | 3.40 | 3.80 |
| 25 | 3/4″ | – | – | – | – | – | – | – | – | – | – | 1.90 | 2.20 | 2.30 | 2.60 | 2.60 | 3.00 | 3.40 | 3.80 | 4.20 | 4.70 |
| 32 | 1″ | – | – | – | – | – | – | – | – | 1.90 | 2.20 | 2.40 | 2.70 | 2.90 | 3.30 | 3.60 | 4.10 | 4.40 | 4.90 | 5.40 | 6.00 |
| 40 | 1.25″ | – | – | – | – | – | – | 1.90 | 2.20 | 2.40 | 2.70 | 3.00 | 3.40 | 3.70 | 4.20 | 4.50 | 5.10 | 5.40 | 6.00 | 6.70 | 7.50 |
| 50 | 1.50″ | – | – | – | – | – | 2.00 | 2.30 | 2.40 | 2.70 | 2.00 | 2.40 | 3.70 | 4.20 | 4.60 | 5.20 | 5.30 | 6.80 | 7.60 | 8.40 | 9.30 |
| 63 | 2.0″ | – | – | – | – | 2.50 | 2.90 | 3.00 | 3.40 | 3.70 | 4.20 | 4.70 | 5.30 | 5.80 | 6.50 | 7.00 | 7.80 | 8.50 | 9.60 | 10.60 | 11.70 |
| 75 | 2.5″ | 1.90 | 2.20 | 2.30 | 2.60 | 2.90 | 3.30 | 3.60 | 4.10 | 4.50 | 5.10 | 5.60 | 6.30 | 6.90 | 7.70 | 8.40 | 9.20 | 10.20 | 11.30 | 12.50 | 13.90 |
| 90 | 3.0″ | 2.20 | 2.50 | 2.80 | 3.20 | 3.50 | 4.00 | 4.30 | 4.80 | 5.30 | 5.90 | 6.70 | 7.50 | 8.20 | 9.10 | 10.00 | 11.10 | 12.20 | 13.50 | 15.00 | 16.60 |
| 110 | 4.0″ | 2.70 | 3.10 | 3.40 | 3.80 | 4.30 | 4.80 | 5.30 | 6.00 | 6.50 | 7.30 | 8.10 | 9.00 | 10.00 | 11.10 | 12.30 | 13.60 | 14.90 | 16.50 | 18.40 | 20.30 |
| 125 | 4.5″ | 3.10 | 3.60 | 3.80 | 4.30 | 4.80 | 5.40 | 6.00 | 6.70 | 7.40 | 8.20 | 9.20 | 10.20 | 11.40 | 12.70 | 13.90 | 15.40 | 16.90 | 18.70 | 20.90 | 23.10 |
| 140 | 5.0″ | 3.50 | 4.00 | 4.30 | 4.80 | 5.40 | 6.00 | 6.70 | 7.50 | 8.20 | 9.20 | 10.30 | 11.40 | 12.80 | 14.20 | 15.60 | 17.30 | 19.00 | 21.00 | 23.40 | 25.80 |
| 160 | 6.0″ | 3.90 | 4.40 | 4.90 | 5.50 | 6.20 | 6.90 | 7.70 | 8.60 | 9.50 | 10.60 | 11.80 | 13.10 | 14.60 | 16.20 | 17.80 | 19.70 | 21.70 | 24.00 | 26.70 | 29.50 |
| 180 | 7.0″ | 4.40 | 4.90 | 5.50 | 6.20 | 7.00 | 7.80 | 8.50 | 9.60 | 10.60 | 11.80 | 13.30 | 14.70 | 16.40 | 18.10 | 20.00 | 22.10 | 24.40 | 26.90 | 30.00 | 33.10 |
| 200 | 8.0″ | 4.90 | 5.60 | 6.10 | 6.80 | 7.70 | 8.60 | 9.60 | 10.70 | 11.80 | 13.10 | 14.70 | 16.30 | 18.20 | 20.10 | 22.30 | 24.60 | 27.10 | 29.90 | 33.40 | 36.80 |
Standard Dimensional Ratio (SDR)
| Material | Design Stress (Mpa) | Nominal Pressure (PN) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 4 | 5 | 6 | 8 | 10 | 12.5 | 16 | 20 | ||
| PE 100 | 8.0 | SDR 33 | SDR 26 | SDR 21 | SDR 17 | SDR 13.6 | SDR 11 | SDR 9 | SDR 7.4 |
| PE 80 | 6.4 | SDR 26 | SDR 21 | SDR 17 | SDR 13.6 | SDR 11 | SDR 9 | SDR 7.4 | SDR 6 |
| PE 63 | 5.0 | SDR 21 | SDR 17 | SDR 13.6 | SDR 11 | – | – | – | – |
Coil Dimensions
| O.D. mm | SDR | Coil Length meter | O.D | I.D | Width | Accommodation for regular truck Coils |
|---|---|---|---|---|---|---|
| Feet | ||||||
| 20 | 6/7.4/9/11 | 500 | 3.2 | 2.0 | 1.7 | 125 |
| 25 | 6/7.4/9/11/13.6 | 3.9 | 2.3 | 2.0 | 75 | |
| 32 | 6/7.4/9/11/13.6/17 | 4.2 | 2.7 | 2.1 | 32 | |
| 40 | 7.4/9/11/13.6/17/21 | 5.5 | 3.4 | 2.1 | 15 | |
| 50 | 7.4/9/11/13.6/17/21/26 | 6.1 | 4.2 | 2.1 | 12 | |
| 63 | 7.4/9/11/13.6/17/21/26 | 300 | 7.4 | 4.1 | 2.1 | 8 |
| 75 | 7.4/9/11/13.6/17/21 | 8.0 | 4.1 | 2.1 | 8 | |
| 90 | 7.4/9/11/13.6/17 | 200 | 8.6 | 4.1 | 2.1 | 8 |
| 90 | 21/26 | 10.0 | 7.0 | 2.1 | 8 | |
| 110 | 9/11/13.6 | 100 | 8.4 | 4.1 | 2.1 | 8 |
| 110 | 17/21 | 11.0 | 8.0 | 2.1 | 5 | |
Application
- Drinking Water Supply.
- Lifting of water for agriculture Irrigation or farm house purpose.
- Obtain Water through pumps, bore wells using jets and submersible pumps show better Performance in tube well boring.
- Industrial disposal of chemical effluent & waste.
- Sewerage and drainage systems.
- Transportation of aggressive fluids chemicals and acid.
- Water supply mains and distribution lines.
- Domestic plumbing & floor heating pipe lines.
- Centrally heated hot water pipeline in building, hotels, swimming pools.
- Telecommunication cable ducting.
- Air Conditioning ducting.
- Portable Water supply in urban area as well as rural area.
- Gases like natural gas, liquefied gas and fermentation Gas and oil distribution Supplying lines.
- Cooling water pipe lines like thermal power equipment.
- Used for transportation slurries of iron, Fly Ash etc.
Special Features & Identity
- Light in weight and high tensile strength.
- Resistance to Corrosion, abrasion & UV radiation.
- Smooth internal surface finish which have low friction which save energy.
- Have no effect of weather conditions.
- Strong and long lasting., Up to 50 years durability
- Installed in bore wells without joints.
- Hard and unbreakable
- Low thermal and electrical conductivity.
- Non-toxic
- Perfect weld ability
- Safe for lying under water, under soil, under coastal salt marshes.
- Can be butt welded at site in minutes making joints very strong.
- Safe for portable water as raw material comes with a food grade certificate.
Dimension & Wall Thickness of HDPE Pipe
Pipe Wall Thickness in mm
| SDR | SDR 41 | SDR 33 | SDR 26 | SDR 21 | SDR 17 | SDR 13.6 | SDR 11 | SDR 9 | SDR 7.4 | SDR 6 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Grade | Nominal Pressure (PN) Bar | ||||||||||||||||||||
| PE 63 | PN 2 | PN 2.5 | PN 3.2 | PN 4 | PN 5 | PN 6 | PN 8 | – | – | – | |||||||||||
| PE 80 | PN 2.5 | PN 3.2 | PN 4 | PN 5 | PN 6 | PN 8 | PN 10 | PN 12.5 | PN 16 | PN 20 | |||||||||||
| PE 100 | PN 3 | PN 4 | PN 5 | PN 6 | PN 8 | PN 10 | PN 12.5 | PN 16 | – | – | |||||||||||
| OD | Wall Thickness (mm) | ||||||||||||||||||||
| Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | ||||||||||||
| mm | inch | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | Min | Max |
| 16 | 1/4″ | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1.80 | 2.10 | 2.20 | 2.50 | 2.70 | 3.10 |
| 20 | 1/2″ | – | – | – | – | – | – | – | – | – | – | – | – | 1.90 | 2.20 | 2.20 | 2.60 | 2.70 | 3.10 | 3.40 | 3.80 |
| 25 | 3/4″ | – | – | – | – | – | – | – | – | – | – | 1.90 | 2.20 | 2.30 | 2.60 | 2.60 | 3.00 | 3.40 | 3.80 | 4.20 | 4.70 |
| 32 | 1″ | – | – | – | – | – | – | – | – | 1.90 | 2.20 | 2.40 | 2.70 | 2.90 | 3.30 | 3.60 | 4.10 | 4.40 | 4.90 | 5.40 | 6.00 |
| 40 | 1.25″ | – | – | – | – | – | – | 1.90 | 2.20 | 2.40 | 2.70 | 3.00 | 3.40 | 3.70 | 4.20 | 4.50 | 5.10 | 5.40 | 6.00 | 6.70 | 7.50 |
| 50 | 1.50″ | – | – | – | – | – | 2.00 | 2.30 | 2.40 | 2.70 | 2.00 | 2.40 | 3.70 | 4.20 | 4.60 | 5.20 | 5.30 | 6.80 | 7.60 | 8.40 | 9.30 |
| 63 | 2.0″ | – | – | – | – | 2.50 | 2.90 | 3.00 | 3.40 | 3.70 | 4.20 | 4.70 | 5.30 | 5.80 | 6.50 | 7.00 | 7.80 | 8.50 | 9.60 | 10.60 | 11.70 |
| 75 | 2.5″ | 1.90 | 2.20 | 2.30 | 2.60 | 2.90 | 3.30 | 3.60 | 4.10 | 4.50 | 5.10 | 5.60 | 6.30 | 6.90 | 7.70 | 8.40 | 9.20 | 10.20 | 11.30 | 12.50 | 13.90 |
| 90 | 3.0″ | 2.20 | 2.50 | 2.80 | 3.20 | 3.50 | 4.00 | 4.30 | 4.80 | 5.30 | 5.90 | 6.70 | 7.50 | 8.20 | 9.10 | 10.00 | 11.10 | 12.20 | 13.50 | 15.00 | 16.60 |
| 110 | 4.0″ | 2.70 | 3.10 | 3.40 | 3.80 | 4.30 | 4.80 | 5.30 | 6.00 | 6.50 | 7.30 | 8.10 | 9.00 | 10.00 | 11.10 | 12.30 | 13.60 | 14.90 | 16.50 | 18.40 | 20.30 |
| 125 | 4.5″ | 3.10 | 3.60 | 3.80 | 4.30 | 4.80 | 5.40 | 6.00 | 6.70 | 7.40 | 8.20 | 9.20 | 10.20 | 11.40 | 12.70 | 13.90 | 15.40 | 16.90 | 18.70 | 20.90 | 23.10 |
| 140 | 5.0″ | 3.50 | 4.00 | 4.30 | 4.80 | 5.40 | 6.00 | 6.70 | 7.50 | 8.20 | 9.20 | 10.30 | 11.40 | 12.80 | 14.20 | 15.60 | 17.30 | 19.00 | 21.00 | 23.40 | 25.80 |
| 160 | 6.0″ | 3.90 | 4.40 | 4.90 | 5.50 | 6.20 | 6.90 | 7.70 | 8.60 | 9.50 | 10.60 | 11.80 | 13.10 | 14.60 | 16.20 | 17.80 | 19.70 | 21.70 | 24.00 | 26.70 | 29.50 |
| 180 | 7.0″ | 4.40 | 4.90 | 5.50 | 6.20 | 7.00 | 7.80 | 8.50 | 9.60 | 10.60 | 11.80 | 13.30 | 14.70 | 16.40 | 18.10 | 20.00 | 22.10 | 24.40 | 26.90 | 30.00 | 33.10 |
| 200 | 8.0″ | 4.90 | 5.60 | 6.10 | 6.80 | 7.70 | 8.60 | 9.60 | 10.70 | 11.80 | 13.10 | 14.70 | 16.30 | 18.20 | 20.10 | 22.30 | 24.60 | 27.10 | 29.90 | 33.40 | 36.80 |
Standard Dimensional Ratio (SDR)
| Material | Design Stress (Mpa) | Nominal Pressure (PN) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 4 | 5 | 6 | 8 | 10 | 12.5 | 16 | 20 | ||
| PE 100 | 8.0 | SDR 33 | SDR 26 | SDR 21 | SDR 17 | SDR 13.6 | SDR 11 | SDR 9 | SDR 7.4 |
| PE 80 | 6.4 | SDR 26 | SDR 21 | SDR 17 | SDR 13.6 | SDR 11 | SDR 9 | SDR 7.4 | SDR 6 |
| PE 63 | 5.0 | SDR 21 | SDR 17 | SDR 13.6 | SDR 11 | – | – | – | – |
Coil Dimensions
| O.D. mm | SDR | Coil Length meter | O.D | I.D | Width | Accommodation for regular truck Coils |
|---|---|---|---|---|---|---|
| Feet | ||||||
| 20 | 6/7.4/9/11 | 500 | 3.2 | 2.0 | 1.7 | 125 |
| 25 | 6/7.4/9/11/13.6 | 3.9 | 2.3 | 2.0 | 75 | |
| 32 | 6/7.4/9/11/13.6/17 | 4.2 | 2.7 | 2.1 | 32 | |
| 40 | 7.4/9/11/13.6/17/21 | 5.5 | 3.4 | 2.1 | 15 | |
| 50 | 7.4/9/11/13.6/17/21/26 | 6.1 | 4.2 | 2.1 | 12 | |
| 63 | 7.4/9/11/13.6/17/21/26 | 300 | 7.4 | 4.1 | 2.1 | 8 |
| 75 | 7.4/9/11/13.6/17/21 | 8.0 | 4.1 | 2.1 | 8 | |
| 90 | 7.4/9/11/13.6/17 | 200 | 8.6 | 4.1 | 2.1 | 8 |
| 90 | 21/26 | 10.0 | 7.0 | 2.1 | 8 | |
| 110 | 9/11/13.6 | 100 | 8.4 | 4.1 | 2.1 | 8 |
| 110 | 17/21 | 11.0 | 8.0 | 2.1 | 5 | |